Vacuum Tubing
Accuflow Systems Saint-Gobain PVC Tubing, 1/8 in x 1/4 in, 100 ft
Clear, flexible PVC tubing intended for laboratory and industrial fluid transfer. Provides visual clarity for flow inspection, good flex life for routing and peristaltic pump use, and broad chemical resistance; uses a non-DEHP plasticizer and contains no BPA or phthalates.
- Material: PVC.
- Color/clarity: Clear.
- Inner diameter: 1/8 in.
- Outer diameter: 1/4 in.
- Wall thickness: 1/16 in.
- Length: 100 ft per package.
- Temperature range: -45 °F to 165 °F (-43 °C to 74 °C).
- Mechanical properties: Shore A 67, tensile strength 2,450 psi, ultimate elongation 400%.
- Plasticizer: non-DEHP; contains no BPA or phthalates.
Accuflow Systems Saint-Gobain Tubing, Tygon E-3603 PVC, 5/8 in ID, 50 ft
Flexible crystal-clear PVC tubing formulated for medical and diagnostic fluid handling where chemical compatibility, visual inspection, and low extractables are required.
- Inner diameter: 5/8 in (15.9 mm).
- Outer diameter: 7/8 in (22.2 mm).
- Wall thickness: 1/8 in (3.2 mm).
- Package length: 50 ft (15 m).
- Material: phthalate-free PVC thermoplastic.
- Minimum bend radius: 2-3/8 in (60.3 mm).
- Maximum working pressure (73°F): 17 psi (1.2 bar).
- Maximum recommended operating temperature: 165°F (74°C).
Accuflow Systems PharMed BPT Tubing, 1/32 in ID, 5/32 in OD
PharMed BPT tubing is a biocompatible peristaltic pump tubing formulated for extended flex life and reduced gas and vapor permeability compared with silicone. It is intended for diagnostic, laboratory, and bioprocess fluid transfer where chemical resistance and biocompatibility are required.
- 1/32 in inner diameter, 5/32 in outer diameter.
- Standard 25 ft (7.6 m) spool length.
- Maximum service temperature 275°F (135°C); low temperature embrittlement -75°F (-59°C).
- Meets USP <88> Class VI and references to ISO 10993-5.
- Very good general chemical resistance; excellent resistance to acids, alkalis, and oxidizers.
- Formulated for peristaltic pump use with extended flex life and reduced gas permeability compared with silicone.
- Typical applications include peristaltic pump lines, cell harvest and media transfer, bioreactor process lines, aseptic filling, and diagnostics.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 1/4 in ID, PVC, 50 ft
Saint-Gobain Tygon S3 B-44-4X tubing is a flexible, food-grade PVC tubing engineered for transfer and processing in food, milk, and dairy applications. It features a smooth, non-porous bore for sanitary fluid handling, glass-like clarity for visual monitoring, and resistance to common cleaners and sanitizers.
- Smooth, non-porous bore minimizes particulate entrapment and bacterial growth.
- Clear, flexible PVC construction allows visual flow monitoring and easy routing.
- 1/4 in ID, 3/8 in OD, 1/16 in wall, 50 ft package length.
- Complies with FDA food-contact regulations, NSF-51, NSF-61, and 3-A sanitary standards.
- Does not contain BPA or phthalates.
- Resistant to harsh alkaline cleaners and common sanitizers.
Accuflow Systems Saint-Gobain Tygon Laboratory Tubing, Phthalate-Free, 1/4 in I.D., 50 ft
Saint-Gobain Tygon S3 E-3603 is a phthalate-free, bio-based, clear flexible laboratory tubing formulated for chemical compatibility, visual inspection, and vacuum-capable fluid transfer. Typical sold configuration for the referenced SKU is 1/4 in inside diameter (≈6.35 mm), 5/16 in outside diameter (≈7.94 mm), 0.03 in wall (≈0.79 mm), supplied in 50 ft coils. The formulation provides a smooth inner bore, lot-to-lot consistency, and regulatory compliance for laboratory and food-contact applications.
- Phthalate-free, bio-based plasticizer formulation.
- Smooth, polished inner wall to help prevent buildup.
- Suitable for vacuum and peristaltic pump applications.
- Non-toxic and non-contaminating; contains no BPA or phthalates.
- Meets USP Class VI, (EU) 10/2011, (EC) 1935/2004, and FDA food-contact criteria.
- Fully autoclavable and sterilizable.
- Standard sizes available to hold full vacuum at room temperature.
Accuflow Systems Saint-Gobain Versilon Tubing, Ester-based Polyurethane, 1/4 in ID, 100 ft
Versilon C-210-A (Tygothane C-210-A) is a clear, ester-based polyurethane tubing designed for chemical transfer, fuel and lubricant lines, and pneumatic systems. Plasticizer-free construction provides flexibility across extreme temperatures while offering high tear strength and abrasion resistance for demanding fluid-handling and instrumentation applications.
- Ester-based polyurethane offers high tear strength and abrasion resistance.
- Plasticizer-free formulation maintains flexibility in extreme temperatures.
- Wide operating temperature range: -100°F to 175°F (-73°C to 79°C).
- Available size: 1/4 in ID, 3/8 in OD, 1/16 in wall, 100 ft length.
- High tensile strength and 500% elongation support rugged use and repeated flexing.
- Suitable for fuel, lubricant, pneumatic, and abrasive slurry transfer applications.
- Clear tubing permits visual flow monitoring and contamination detection.
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, 3/16 in ID, 1/4 in OD
Tygon E-3603 thermoplastic tubing is designed for laboratory fluid transfer, peristaltic pump use, and light vacuum service. The phthalate-free formulation provides flexible, thin-walled tubing with consistent dimensional stability and low flow resistance. Packaged in a 50 ft coil for bench and instrument applications.
- 3/16 in inner diameter, 1/4 in outer diameter, 1/32 in wall
- 50 ft (15 m) packaged length
- Phthalate-free formulation
- Minimum bend radius 1 in (25.4 mm)
- Maximum working pressure 14 psi (1.0 bar) at 73°F
- Vacuum rating 9 inHg (229 mmHg)
- Flexible thin wall for low flow resistance
Accuflow Systems Saint-Gobain Tygon Tubing, 5/16 in ID, 50 ft, Yellow
Flexible tubing formulated to resist hydrocarbons and minimize swelling and embrittlement, with low extractables and translucent yellow appearance for flow monitoring.
- Inside diameter 5/16 in, outside diameter 7/16 in, wall thickness 1/16 in.
- Pack length 50 ft.
- Color translucent yellow for visual identification and flow monitoring.
- Formulation resists hydrocarbons and minimizes swelling and hardening.
- Durometer hardness Shore A 57 for flexibility and durability.
- Maximum recommended operating temperature 165°F (74°C); brittleness by impact -35°F (-37°C).
- Suitable for fuel and lubricant applications including small engine fuel lines, coolant transfer, and general automotive use.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 3/32 in ID, 5/32 in OD
Clear, flexible non-DEHP thermoplastic tubing designed for medical and laboratory fluid handling. This tubing provides biocompatible performance for blood-contact and peristaltic pump applications and tolerates common sterilization methods without significant loss of physical properties.
- Biocompatible non-DEHP thermoplastic construction.
- Inner diameter 3/32 in (2.38 mm), outer diameter 5/32 in (3.97 mm), wall thickness 1/32 in (0.79 mm).
- Packaged length 50 ft.
- Meets USP <88> and relevant ISO 10993 biocompatibility tests.
- Compatible with autoclave, ethylene oxide, and gamma sterilization.
- Clear and flexible for visual monitoring and peristaltic pumping.
- Typical applications include blood and IV solutions, dialysis, and drug delivery.
Accuflow Systems Saint-Gobain Tygon Tubing, Beverage, 1/8 in ID, 1/4 in OD
Saint-Gobain Tygon B-44-3 beverage tubing is a clear, flexible thermoplastic elastomer tube formulated for food and beverage transfer and dispensing. It is phthalate-free, non-wetting for complete drainage and cleaning, and offers glass-like clarity for visual flow monitoring.
- Beverage-grade thermoplastic elastomer construction, phthalate-free.
- 1/8 in (3.18 mm) inner diameter, 1/4 in (6.35 mm) outer diameter, 1/16 in (1.59 mm) wall.
- 50 ft coil packaging for bulk fluid handling.
- Compliant with NSF-51, NSF-61, FDA, EU food contact, and Japan Food Sanitation Law.
- Non-wetting surface for easy draining and cleaning, with glass-like clarity for visual inspection.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 1/4 in ID, 3/8 in OD
Saint-Gobain Tygon S3 E-3603 tubing is a clear, flexible thermoplastic elastomer designed for laboratory and vacuum applications. It uses a non-DEHP bio-based plasticizer for improved flex-fatigue resistance and environmental profile, and provides a smooth inner bore and chemical resistance for reliable fluid transfer in peristaltic pumps and general laboratory connections.
- Inside diameter: 1/4 in.
- Outside diameter: 3/8 in.
- Wall thickness: 1/16 in.
- Package length: 100 ft.
- Material: thermoplastic elastomer (non-DEHP).
- Chemical resistant and non-oxidizing.
- Smooth, polished inner bore for consistent flow.
- Resistant to flex-fatigue and abrasion; suitable for peristaltic pumps.
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 3/32 in x 7/32 in, Non-DEHP
Tygon S3 E-3603 laboratory tubing is a clear, flexible thermoplastic elastomer tubing designed for reliable laboratory fluid handling. It provides a glassy smooth inner bore for easy cleaning, broad compatibility with organic chemicals, and resistance to flex-fatigue and abrasion for extended service life. The tubing is suitable for peristaltic pumps, instrumentation connections, vents, drains, and general laboratory transfer applications.
- Thermoplastic elastomer construction for chemical resistance and flexibility.
- Inner diameter 2.38 mm (3/32 in), outer diameter 5.56 mm (7/32 in), wall thickness 1.59 mm (1/16 in).
- Temperature range -46°C to 74°C (-51°F to 165°F).
- Full-vacuum compatible at room temperature; working pressure varies by size.
- Handles most organic laboratory chemicals.
- Phthalate-free, non-DEHP formulation; contains no BPA.
- Resistant to flex-fatigue and abrasion for extended service life.
